Category_1 - Computer Cases and Cooling
Category_2 - Fans
EAN_code - 4044951032372
Manufacturer - Sharkoon
Manufacturer_code - 4044951032372
Name - Sharkoon SHARK Disc RGB Fan
Technical_details - SHARK Disc RGB Fan, case fan The SHARK disc fan is a 120 mm RGB LED fan that not only ensures constant airflow, but also brings a breath of fresh air into the interior of the case thanks to its nine addressable RGB LEDs with impressive light effects. In addition, due to its rubberized contact surface, vibrations are not transmitted to the housing, which ensures low-noise operation. Nine addressable LEDs provide colorful illumination and let the inside of the case shine in a new light. The full blaze of color is reproduced in 16.8 million colors and can also be adjusted to individual taste using the software of compatible mainboards or control units. For the greatest possible compatibility, the RGB LEDs of the SHARK disc fan can be connected to each other via a 3-pin 5V DG or a 4-pin 5V D-coded G connector, depending on the mainboard or the connected device. The SHARK disc fan is compatible with Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion, as well as most other brands with matching pinouts, making integration into existing systems a breeze. Thanks to its hydrodynamic plain bearing, the noise level of the SHARK disc fan is kept at a pleasantly low level, even after long periods of continuous operation. With 1,000 revolutions per minute, the noise level of the fan does not exceed the mark of 17.5 decibels, even during peak periods. Type: fan Colour: transparent EAN code: 4044951032372 Type: case fan Usage: for PC case Fastening: screwed Volume: 17.5dB Equipment: LED lighting LED lighting: Yes, addressable RGB headers LED lighting: color | RGB RGB Standard: AURA Sync, Mystic Light, RGB Fusion, RGB LED Speed: 1,000 rpm Fan Bearing: FDB - Fluid Dynamic Bearing, sleeve bearing Flow rate: 53 m3/h Air Pressure: Up to 0.93mm/H2O Power connector: 3-pin Voltage range: 12 volts Additional information: The SHARK disc fan is equipped with rubberized support points, which reduces the direct contact of the fan with the housing. This results in optimal smooth running while at the same time minimizing housing vibration. Note: For the greatest possible compatibility, the RGB LEDs of the SHARK disc fan can be connected to each other via a 3-pin 5V DG or via a 4-pin 5V D-coded G connector, depending on the mainboard or the connected device will. LED Wire Length: 500+50mm Accessories: available | screws Dimensions: Fan1 | Quantity: 1 piece Width: 120mm Height: 120mm Depth: 25mm Weight: case fan | 97 grams
Weight - 0,14
