10/100/1000/2500 Mbps ports - None
Accessories included -
Application - Medium and large companies
Brand - D-Link
BrandPartCode - DGS-1210-28P/ME/E
Category - Network Switches
Category 1 - Netzwerk
Category 2 - Switching Hubs
Certificates - CE, LVD, UL, CB
Certificates - Compliance certificates - BSMI, CB, CCC, CE, Federal Communications Commission (FCC), Low Voltage Directive (LVD), VCCI
Chassis type - Rack
Console port - Yes
Data transmission - Forwarding rate - 41.7 Mpps
Data transmission - MAC address table - 16000 entries
Data transmission - Number of IP interfaces - 4
Data transmission - Number of queues - 8
Data transmission - Number of static routes - 96
Data transmission - Packet buffer memory - 1.5 MB
Data transmission - Static route - Yes
Data transmission - Store-and-forward - Yes
Data transmission - Switching capacity - 56 Gbit/s
Description - 28-portowy gigabitowy przełącznik PoE Metro Ethernet DGS-1210-28P/ME 24 porty PoE 10/100/1000BASE-T 4 porty SFP Obsługuje 802.3at Power over Ethernet Kompleksowe funkcje warstwy 2, w tym agregacja łączy, Q-in-Q oparte na portach i trunking VLAN Ulepszone bezpieczeństwo sieci dzięki wiązaniu portów IP-MAC (IMPB), liście kontroli dostępu (ACL) i IEEE 802.1X Wbudowana ochrona przeciwprzepięciowa 6 kV, odzyskiwanie ERPS poniżej 50 ms i Dying Gasp zapewniają optymalną niezawodność Idealny do Metro Ethernet
Przełączniki Metro Ethernet serii DGS-1210ME oferują różnorodne konfiguracje portów, w tym porty RJ-45 10/100/1000BASE-T, porty SFP 1G i 10G Porty SFP+ dla zwiększonej przepustowości sieci. Ochrona przeciwprzepięciowa, zaawansowane funkcje warstwy 2 i zestaw narzędzi zabezpieczających i zarządzających sprawiają, że przełączniki Metro Ethernet serii DGS-1210ME są idealne do zastosowań Metro Ethernet.
Wydajne i odporne
W środowiskach o znaczeniu krytycznym przełączniki Metro Ethernet serii DGS-1210ME obsługują protokoły IEEE 802.1D 2004 edition, 802.1w i 802.1s Spanning Tree Protocols (STP). Przełączniki obsługują również agregację łączy IEEE 802.3ad, zwiększając przepustowość i redundancję w celu zapewnienia wyższej dostępności. Ta seria ponadto oferuje jakość usługi (QoS) IEEE 802.1p, umożliwiając klasyfikację ruchu w czasie rzeczywistym w Weighted Round Robin (WRR) i ścisłe poziomy priorytetów mapowane na 8 kolejek. Zaawansowane parametry klasyfikacji ruchu umożliwiają dostrojenie sieci do elastycznych konfiguracji dla określonych aplikacji multimedialnych, takich jak VoIP lub IPTV.
Bezpieczeństwo i uwierzytelnianie
Seria DGS-1210ME obsługuje kontrolę dostępu opartą na portach/hostach IEEE 802.1X, VLAN gościa i uwierzytelnianie RADIUS/TACACS+ w celu zapewnienia ścisłej kontroli dostępu do sieci. Funkcja IP-MAC-Port Binding (IMPB) umożliwia administratorom dalsze zwiększenie kontroli dostępu użytkowników. Wbudowany D-Link Safeguard Engine chroni procesor przed rozgłaszaniem, rozgłaszaniem wielokierunkowym i jednokierunkowym. Ponadto funkcja listy kontroli dostępu (ACL) zwiększa bezpieczeństwo sieci i wydajność przełącznika.
Aplikacje multicast
Seria DGS-1210ME oferuje pełny zestaw funkcji multicast L2, w tym podsłuchiwanie IGMP, filtrowanie IGMP, szybkie opuszczanie i konfigurację ruchu multicast dla określonych portów. Dzięki obsłudze multicast L2 seria DGS-1210ME jest gotowa i zdolna do obsługi rosnących aplikacji IPTV.
Możliwości zarządzania
Przyjazny dla użytkownika interfejs sieciowy zapewnia administratorom dostęp do zaawansowanych funkcji zarządzania, takich jak automatyczna konfiguracja DHCP, umożliwiająca centralne zarządzanie konfiguracjami urządzeń. Przełączniki obsługują protokół Link Layer Discovery Protocol (LLDP), który umożliwia aministratorom lepsze zarządzanie topologią sieci. Każdy port obsługuje również diagnostykę kabli w celu zdalnego rozwiązywania problemów z długością i funkcjonalnością kabli.
Kontrola ruchu i przepustowości
Zintegrowana kontrola przepustowości umożliwia administratorom sieci definiowanie poziomów przepustowości dla przepustowości wejściowej i wyjściowej. Zapewnia minimalną granularność 64 kbps dla kontroli przepustowości portu wejściowego i przepływu oraz minimalną granularność 64 kbps dla przepustowości kolejki wyjściowej. Seria DGS-1210ME obsługuje również kontrolę ruchu, która optymalizuje ogólną wydajność, podczas gdy dublowanie portów pomaga administratorom wykonywać diagnostykę ruchu i śledzić wydajność sieci.
Design - Form factor - 1U
Design - LED indicators - Activity, Fan fail, Link, Power, Speed
Design - Number of fans - 2 fan(s)
Designation - CE+WEEE
dimension depth - 355 mm
dimension height - 95 mm
Dimensions - 440 x 210 x 44 mm
dimension weight - 3800 g
dimension width - 550 mm
ean - 790069467585
EAN - 0790069467585
Environment requirements - Wilgotność: Praca: 0% - 95% RH Przechowywanie: 0% - 95% RH Temperatura: Praca: -5 do 50° C Przechowywanie -20 - 70° C
Fan - Yes
Forwarding mode - Store-and-forward
Forwarding rate - 41.7 Mpps
GTIN - 0790069467585
GTIN - 790069467585
GTIN - 5715063049969
guarantee - 0
guarantee_type - perpetual
Jumbo frame size - 9.216 KB
L2 features -
L3 features -
LongDesc - Gigabit Managed SwitchesThe DGS-1210/ME Series Gigabit Managed Switches provide a diverse range of Gigabit port densities to accommodate various enterprise and public sector connectivity needs. With optional PoE to conveniently power edge devices, SFP ports to extend network connectivity, and advanced Layer 2 functionalities, the DGS-1210/ME Series is ideal for any enterprise access layer or large multi-site deployment and allows businesses to build a more secure and efficient network with advanced network security features and QoS.Flexible Hardware DesignWide range of port and media types, including 10/100/1000BASE-T RJ-45 ports, 100/1000 Mbps GbE/SFP combo ports, and 100/1000 Mbps SFP ports.High Switching Capacity and PoE BudgetUp to 104 Gbps switching capacity with a maximum PoE budget up to 370W.Layer 2 with Layer 3 Lite featuresEquipped with a complete lineup of L2 features, and supports IP interfaces, ARP, IPv6 neighbor discovery (ND) and default routing.Network SecurityD-Link’s innovative Safeguard Engine™ protects the switches against traffic flooding caused by malicious attacks.Simplified ManagementSimple management through user-friendly web configuration or command line interface (CLI) via Telnet or SSH for ease-of-use.Limited Lifetime Warranty & Next Day ServiceRegister to enjoy D-Link Limited Lifetime Warranty support, with complimentary next business day advance replacement service included.Gigabit PerformanceThe DGS-1210/ME Series Gigabit Managed Switches come in a variety of port setups, including Gigabit Ethernet RJ-45 and SFP ports. The DGS-1210-10P/ME, DGS-1210-28P/ME and DGS-1210-52MP/ME switches feature Power over Ethernet (PoE), allowing compatible devices to be installed and powered in remote locations without immediate access to power outlets.Efficient and Resilient NetworkingFor mission critical environments, the DGS-1210/ME Series Gigabit Managed Switches support IEEE 802.1D 2004 edition, 802.1w, and 802.1s Spanning Tree Protocols (STP). The Spanning Tree Protocol allows the switches to participate in Spanning Tree topology, providing an alternative Layer 2 path in the event of a network failover. The switches also support IEEE 802.3ad link aggregation, which enables multiple ports to be grouped to form a single virtual port, increasing bandwidth and redundancy for higher availability. This series furthermore features IEEE 802.1p Quality of Service (QoS), allowing for real-time traffic classification into Weighted Round Robin (WRR) and strict priority levels mapped to 8 queues. Advanced traffic classification parameters allow the network to be tuned for flexible configurations for specific multimedia applications such as VoIP or IPTV.Multicast ApplicationsThe DGS-1210/ME Series features a full set of L2 multicast functions, including IGMP snooping, IGMP filtering, fast leave, and multicast traffic configuration for specific ports. With L2 multicast support, the DGS-1210/ME Series is ready and capable of handling growing IPTV applications. Host-based IGMP/MLD snooping allows for multiple multicast subscribers per physical interface, and ISM VLAN sends multicast streams in a multicast VLAN, saving bandwidth on the backbone. Additionally, ISM VLAN profiles allow users to bind or replace the predefined multicast registration information to subscriber ports quickly and easily.Traffic & Bandwidth ControlIntegrated bandwidth control allows network administrators to define the throughput levels for ingress and egress bandwidth. It provides a minimum granularity of 64 Kbps for ingress port and flow-based bandwidth control, and a minimum granularity of 64 Kbps for egress queue bandwidth. The DGS-1210/ME Series also supports traffic control, which optimizes performance by dropping packets when exceeding a set threshold, while port mirroring helps administrators facilitate traffic diagnostics and track network performance. The DGS-1210/ME Series also provides IGMP snooping with IGMP authentication to prune multicast traffic and to optimize available bandwidth.Management CapabilitiesA user-friendly web interface gives administrators access to advanced management features such as DHCP auto-configuration. This enables switches to load their configuration from a TFTP server once they have been assigned an IP address, allowing central management of device configurations. The switches support Link Layer Discovery Protocol (LLDP), which advertises the device’s capabilities and identity to the local network, allowing administrators to better manage their network topology. Each port also supports cable diagnostics, which can be used to troubleshoot cable length and functionality problems remotely, resulting in lower management overheads.Security & AuthenticationThe DGS-1210/ME Series supports IEEE 802.1X port-based/host-based access control, guest VLAN, and RADIUS/TACACS+ authentication for strict access control to the network. The IP-MAC-Port Binding (IMPB) feature allows administrators to associate a source IP address with a designated MAC address and also offers the flexibility to define the port number to enhance user access control. The built-in D-Link Safeguard Engine™ protects the CPU from broadcast, multicast, and unicast flooding by automatically trapping packets and logging events in these situations. In addition, the Access Control List (ACL) feature enhances network security and switch performance.Free Next-Business-Day ServiceEnjoy our free Next Business Day service, as standard, to replace faulty equipment quickly.Our rapid-response technical support is designed to ensure businesses get the best support for their unique environment. Our extended warranty and enhanced service packages increase the lengths of warranties and further minimises downtime. You can even opt for our Same Business Day Service which guarantees the delivery of the replacement product within 4 hours of confirmation of product failure.
LongProductName - 1U, 24x 10/100/1000BASE-T PoE, 4x SFP, Console RJ-45, UTP Cat5/Cat5e, 56 Gbps, 256 MB DDR3, 32 MB, 52.9/45.3 dB, PoE 193 W, Grey, 3.34kg
LongSummaryDescription - D-Link DGS-1210-28P/ME/E. Switch type: Managed, Switch layer: L2/L3. Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000), Basic switching RJ-45 Ethernet ports quantity: 24, Installed SFP modules quantity: 4, Console port: RJ-45. Full duplex. MAC address table: 16000 entries, Switching capacity: 56 Gbit/s. Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ab, IEEE.... Power over Ethernet (PoE). Form factor: 1U
MAC address table size - 16
Management, monitoring, configuration -
Management features - ARP inspection - Yes
Management features - Configuring Location Settings (CLI) - Yes
Management features - MIB support - • RFC1212 Concise MIB Definitions • RFC1213 MIB II • RFC1215 MIB Traps Convention • RFC1065, 1151, 2578 MIB Structure • RFC1493 Bridge MIB • RFC1157, 2573, 2575, 2576 SNMP MIB • RFC3418 SNMPv2 MIB • RFC2819 RMON MIB • RFC2021 RMONv2 MIB • RFC1643, 1650, 2665 Ether-like MIB • RFC2674 802.1p MIB • RFC 2233 Interface Group MIB • RFC 2618 RADIUS authentication client MIB • RFC 2620 RADIUS accounting client MIB • RFC3289 D-Link Zone Defense MIB • RFC4022 MIB for TCP • RFC4113 MIB for UDP • PoE MIB • DDP MIB • LLDP-MED MIB
Management features - Quality of Service (QoS) support - Yes
Management features - Switch layer - L2/L3
Management features - Switch type - Managed
Management features - System event log - Yes
Management features - Traffic classification - Yes
Management features - Web-based management - Yes
Manufacturer - D-Link
Mean time between failures (MTBF) - 331699 h
Memory buffer - 1.5 MB
MPN - DGS-1210-28P/ME/E
Multicast features - Multicast features - Controllable multicast
Multicast features - Multicast Listener Discovery (MLD) snooping - MLD v1, MLD v2
Multicast features - Multicast support - Yes
Multicast features - Number of multicast groups filtered - 256
name - D-Link DGS-1210-28P/ME/E
Name - D-Link DGS-1210-28P/ME/E 28-Port Layer2 PoE GBit Smart Managed
Network - Active link detection - Yes
Network - Auto-negotiation - Yes
Network - Auto MDI/MDI-X - Yes
Network - Broadcast storm control - Yes
Network - Cable types supported - Cat5, Cat5e
Network - Copper ethernet cabling technology - 10BASE-T, 100BASE-TX, 1000BASE-T
Network - Ethernet LAN data rates - 1000 Mbit/s
Network - Flow control support - Yes
Network - Full duplex - Yes
Network - Half duplex - Yes
Network - IPv4 routes - 64
Network - IPv6 routes - 32
Network - Link aggregation - Yes
Network - Networking standards - IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3ab, IEEE 802.3ah, IEEE 802.3at, IEEE 802.3az, IEEE 802.3i, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Network - Number of VLANs - 4094
Network - Port mirroring - Yes
Network - Spanning tree protocol - Yes
Network - Virtual LAN features - MAC address-based VLAN, Port-based VLAN, Private VLAN, Protocol-based VLAN
Network - VLAN support - Yes
Network architecture - GigabitEthernet
Number of 10/100 Mbps ports - None
Number of 10/100/1000 Mbps ports - 24
Number of 10Gb ports - None
Number of 32Gb ports - 24
Number of 100Gb ports - 4
Number of COMBO ports - None
Number of PoE++ ports - 1
Number of PoE+ ports - None
Number of PoE ports (PoE & PoE+) - None
Number of ports 1G/2.5G/5G/10G - 1
Number of ports 25Gb - None
Number of QSFP+ ports - None
Number of SFP+ ports - None
Number of SFP56 ports - None
Number of SFP ports - 4
Operational conditions - Heat dissipation - 857.98 BTU/h
Operational conditions - Operating relative humidity (H-H) - 10 - 90%
Operational conditions - Operating temperature (T-T) - -5 - 50 °C
Operational conditions - Storage relative humidity (H-H) - 0 - 95%
Operational conditions - Storage temperature (T-T) - -40 - 70 °C
Optical fiber - Fiber ethernet cabling technology - 1000BASE-X
Other features - Interfejsy: 24 x porty 10/100/1000BASE-T 24 x 1000Base-T PoE 4 x 1000M SFP 4 x interfejs Max IP 4 x porty SFP
Other functions -
Performance - Fanless - No
Performance - Flash memory - 32 MB
Performance - Internal memory - 256 MB
Performance - Mean time between failures (MTBF) - 331669 h
Performance - Memory type - DDR3-SDRAM
Performance - Noise level - 52.9 dB
Ports & interfaces - Basic switching RJ-45 Ethernet ports quantity - 24
Ports & interfaces - Basic switching RJ-45 Ethernet ports type - Gigabit Ethernet (10/100/1000)
Ports & interfaces - Console port - RJ-45
Ports & interfaces - Installed SFP modules quantity - 4
Power - AC input frequency - 50/60 Hz
Power - AC input voltage - 100 - 240 V
Power - Input voltage - 100 - 240 V
Power - Power consumption (max) - 251.5 W
Power - Power protection features - Surge protection
Power - Power source - AC
Power consumption - 251.5 W
Power over Ethernet (PoE) - Power over Ethernet (PoE) - Yes
Power over Ethernet (PoE) - Power over Ethernet (PoE) ports quantity - 24
Power over Ethernet (PoE) - Total Power over Ethernet (PoE) budget - 193 W
Power supply - Wejście zasilania: AC Wejście: 100 do 240 V AC, 50/60 Hz Maksymalne zużycie energii: 251,5 W (PoE włączone) 28,7 W (PoE wyłączone)
producer - D-Link
ProductName - DGS-1210-28P/ME/E
Protocols - GARP VLAN Registration Protocol (GVRP) - Yes
Protocols - IPv4 & IPv6 features - Dual stack IPv4/IPv6, ICMPv6, IPv4/IPv6 access-control list (ACL), IPv6 Path MTU Discovery, IPv6 Telnet
QoS -
Security -
Security - Access Control List (ACL) - Yes
Security - Access Control List (ACL) ingress - 256
Security - Access Control List (ACL) rules - 256
Security - Authentication type - AAA, RADIUS, TACACS+
Security - BPDU filtering/protection - Yes
Security - DHCP features - DHCP client, DHCP relay, DHCP server, DHCP snooping
Security - IGMP snooping - Yes
Security - IP-MAC-Port binding - Yes
Security - Loop protection - Yes
Security - Password protection - Yes
Security - Queue scheduling algorithms - Strict Priority Queue (SPQ), Weighted Round Robin (WRR)
Security - Security algorithms - EAP, SNMP, SNMPv2, SNMPv3
Security - SSH/SSL support - Yes
ShortSummaryDescription - D-Link DGS-1210-28P/ME/E, Managed, L2/L3, Gigabit Ethernet (10/100/1000), Full duplex, Power over Ethernet (PoE), 1U
Supported protocols and standards - IEEE 802.1D STP IEEE 802.1s MSTP IEEE 802.1w RSTP
Support for Jumbo frames - Yes
Sustainability - Sustainability certificates - UL ECOLOGO
Sustainability - Sustainability compliance - Yes
Switch class - Managed
Switch layer - L2
Throughput - 56 GB/s
Title - D-Link DGS-1210-28P/ME/E network switch Managed L2/L3 Gigabit Ethernet (10/100/1000) Power over Ethernet (PoE) 1U
URL - https://eu.dlink.com/uk/en/products/dgs-1210-me-series-gigabit-managed-switches
vendpn - DGS-1210-28P/ME/E
VLAN -
WarrantyInfo -
Weight - 3.34 kg
Weight & dimensions - Depth - 210 mm
Weight & dimensions - Height - 44 mm
Weight & dimensions - Weight - 3.34 kg
Weight & dimensions - Width - 440 mm
