ID: 942840
Product code: SAT5210-7000G
Can be ordered 10 units Availability: 14 days after order approval
Warranty: 3 years
Synology SAT5210, 7TB
Picture may differ from actual product, there can be accessories and parts not supplied with the actual product.
-
Omniva parcel machineWithin 1-2 working days1.99 € -
SmartPosti parcel terminalWithin 1-2 working days1.99 € -
Unisend parcel terminalWithin 1-2 working days1.99 € -
Delivery by courier to the addressWithin 1-2 working days5.99 €
Main product parameters All parameters
- Capacity: 7 TB
- Type: SATA
- Read speed (sequential): 530 MB/s
- Write speed (sequential): 500 MB/s
- Form factor: 2.5"
- Interface: SATA III (6Gb/s)
Description
This Synology brand SSD has a 7 TB capacity and a 2.5" format.
The disk is equipped with the traditional SATA port. It uses SATA data and power cables.
This is a SATA type SSD disk. It uses the SATA III protocol, which is older technology, however SATA is still a good option for everyday use and budget solutions.
530 MB/s – this is the data reading speed that this SSD disk is capable of reaching. However, we must remember one crucial nuance - "fast" disks may not show the performance promised by the manufacturer if adequate cooling is not provided.
The writing speed for this SSD disk reaches 500 MB/s. Without a suitable cooling mechanism, "fast" disks may not be able to achieve the performance indicators promised by the manufacturer.
The format of this SSD drive (physical size of the drive) is 2.5".
This SSD drive interface is SATA III (6Gb/s). If you insert this drive into an older interface slot, the speed of the drive will decrease, as the drive will not have sufficient data transfer speed (Bandwidth).
Basic information
Capacity
7 TB
The HDD capacity in Gigabytes indicates how much information can be stored by the HDD. The capacity of the HDD is fixed and cannot be increased after buying the HDD. Therefore, upon buying the HDD you should verify its compliance with your current volume requirements and provides a reserve for future needs.
Type
: SATA
Read speed (sequential)
530 MB/s
Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.
If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.
Write speed (sequential)
500 MB/s
The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.
Functionality
Radiators
: Nav
Lighting
: Nav
Ports and equipment
Form factor
2.5"
Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at TopPC.ee section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.
1.8" discs are intended for the ultra-compact class portable computers.
PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.
Interface
: SATA III (6Gb/s)
Interface
SATA
SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.
The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.
Specifikācija
Memory type
: Not specified
Random Read IOPS
: 97K
Random Write IOPS
: 50K
Endurance (TBW)
: 11460 TB
More detailed specification
Category Code - SSM
Certification Features - EAC
BSMI
VCCI
RCM
KC
Compliance certificates Other features - CE, Federal Communications Commission (FCC), RoHS
Component for Features - NAS
Depth Weight & dimensions - 100 mm
Description - Enterprise solid-state drives
Synology SAT5200 Series SATA SSDs offer stable I/O performance while reducing the latency of critical services and applications. They are built to handle mixed and intensive 24/7 workloads without compromising on endurance, providing a streamlined storage experience on Synology systems with minimal service disruptions. Stable high performance for demanding environments
Engineered for demanding environments such as for online transaction processing (OLTP) databases and virtualization deployments, Synology SAT5200 Series drives deliver consistently high performance. Enterprise-grade endurance and reliability 11,460 TBW
Built to withstand 24/7 intensive workloads with endurance up to 11,460 TBW. End-to-end data protection
Data integrity and consistency are safeguarded over the entire data transfer path. Power loss protection circuit design
Dedicated capacitors provide sufficient power to flush data-in-flight into NAND flash during a power loss event, further preventing data corruption. Better analytics
Full integration with Synology DiskStation Manager (DSM) enables lifetime analytics for each SAT5200 Series drive based on actual workloads. Timely notifications
Plan further ahead for uninterrupted system performance and longevity with timely notifications. Optimal use
Easy monitoring allows you to make optimal use of each SSD. Purpose-built for Synology systems
Synology SAT5200 Series SSDs are thoroughly validated for our systems following each engineering change, while firmware and component changes are strictly managed. Intensive I/O stress, power cycling, and temperature trials ensure that all products meet our strictest standards for quality and reliability.
EAN - 4711174725199
Gross Weight Kg - 0,2
Hardware encryption Features - No
Height Weight & dimensions - 7 mm
Interface Features - Serial ATA III
Manufacturer Code - SAT5210-7000G
Manufacturer Name - Synology
Mean time between failures (MTBF) Features - 1500000 h
NVMe Features - No
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Operating voltage Power - 5 V
Power consumption (idle) Power - 1.8 W
Power consumption (read) Power - 3.3 W
Power consumption (write) Power - 5.1 W
Random read (4KB) Features - 97000 IOPS
Random write (4KB) Features - 50000 IOPS
Sequential read speed (ATTO) Features - 530 MB/s
Sequential write speed (ATTO) Features - 500 MB/s
Short description - Synology NAS SSD 2.5" SATA 7.0TB SAT5210-7000G
SSD capacity Features - 7 TB
SSD form factor Features - 2.5"
SSD series - SAT5200
Storage temperature (T-T) Operational conditions - -40 - 85 °C
Summary - Synology SAT5210. SSD capacity: 7 TB, SSD form factor: 2.5", Component for: NAS
TBW rating Features - 11460
Unit Box Height - 0.015
Unit Box Length - 0.15
Unit Box Width - 0.115
Unit Calculated Volume - 0.0002588 cubm
Unit Calculated Weight - 0.11 kg
Units per Shipping Box - 1
Vendor Homepage - https://www.synology.com/en-eu/products/solid_state_drives/SAT5200#specs
Warranty - 60L months
Width Weight & dimensions - 69.8 mm
Certification Features - EAC
BSMI
VCCI
RCM
KC
Compliance certificates Other features - CE, Federal Communications Commission (FCC), RoHS
Component for Features - NAS
Depth Weight & dimensions - 100 mm
Description - Enterprise solid-state drives
Synology SAT5200 Series SATA SSDs offer stable I/O performance while reducing the latency of critical services and applications. They are built to handle mixed and intensive 24/7 workloads without compromising on endurance, providing a streamlined storage experience on Synology systems with minimal service disruptions. Stable high performance for demanding environments
Engineered for demanding environments such as for online transaction processing (OLTP) databases and virtualization deployments, Synology SAT5200 Series drives deliver consistently high performance. Enterprise-grade endurance and reliability 11,460 TBW
Built to withstand 24/7 intensive workloads with endurance up to 11,460 TBW. End-to-end data protection
Data integrity and consistency are safeguarded over the entire data transfer path. Power loss protection circuit design
Dedicated capacitors provide sufficient power to flush data-in-flight into NAND flash during a power loss event, further preventing data corruption. Better analytics
Full integration with Synology DiskStation Manager (DSM) enables lifetime analytics for each SAT5200 Series drive based on actual workloads. Timely notifications
Plan further ahead for uninterrupted system performance and longevity with timely notifications. Optimal use
Easy monitoring allows you to make optimal use of each SSD. Purpose-built for Synology systems
Synology SAT5200 Series SSDs are thoroughly validated for our systems following each engineering change, while firmware and component changes are strictly managed. Intensive I/O stress, power cycling, and temperature trials ensure that all products meet our strictest standards for quality and reliability.
EAN - 4711174725199
Gross Weight Kg - 0,2
Hardware encryption Features - No
Height Weight & dimensions - 7 mm
Interface Features - Serial ATA III
Manufacturer Code - SAT5210-7000G
Manufacturer Name - Synology
Mean time between failures (MTBF) Features - 1500000 h
NVMe Features - No
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Operating voltage Power - 5 V
Power consumption (idle) Power - 1.8 W
Power consumption (read) Power - 3.3 W
Power consumption (write) Power - 5.1 W
Random read (4KB) Features - 97000 IOPS
Random write (4KB) Features - 50000 IOPS
Sequential read speed (ATTO) Features - 530 MB/s
Sequential write speed (ATTO) Features - 500 MB/s
Short description - Synology NAS SSD 2.5" SATA 7.0TB SAT5210-7000G
SSD capacity Features - 7 TB
SSD form factor Features - 2.5"
SSD series - SAT5200
Storage temperature (T-T) Operational conditions - -40 - 85 °C
Summary - Synology SAT5210. SSD capacity: 7 TB, SSD form factor: 2.5", Component for: NAS
TBW rating Features - 11460
Unit Box Height - 0.015
Unit Box Length - 0.15
Unit Box Width - 0.115
Unit Calculated Volume - 0.0002588 cubm
Unit Calculated Weight - 0.11 kg
Units per Shipping Box - 1
Vendor Homepage - https://www.synology.com/en-eu/products/solid_state_drives/SAT5200#specs
Warranty - 60L months
Width Weight & dimensions - 69.8 mm
