ID: 476473
Product code: TS128GMTS430S
Can be ordered 20 units Availability: 14 days after order approval
Warranty: 3 years
Transcend SSD 430S, 128GB, M.2 (2242)
Picture may differ from actual product, there can be accessories and parts not supplied with the actual product.
-
Omniva parcel machineWithin 1-2 working days1.99 € -
SmartPosti parcel terminalWithin 1-2 working days1.99 € -
Unisend parcel terminalWithin 1-2 working days1.99 € -
Delivery by courier to the addressWithin 1-2 working days5.99 €
Main product parameters All parameters
- Capacity: 128 GB
- Type: SATA
- Read speed (sequential): 560 MB/s
- Write speed (sequential): 500 MB/s
- Form factor: M.2 42mm (2242)
- Interface: SATA III (6Gb/s)
Description
Available for purchase, the Transcend M.2 42mm (2242) format SSD disk with a large volume of 128 GB.
The disk is equipped with the currently most advanced and compact M.2 connection port.
This is a SATA type of disk. Even though this SSD disk operates with an older SATA III protocol, it is fully suitable for both everyday tasks and situations when it's important to reduce costs.
560 MB/s – this is the data reading speed that this SSD disk is capable of reaching. However, we must remember one crucial nuance - "fast" disks may not show the performance promised by the manufacturer if adequate cooling is not provided.
500 MB/s - this SSD drive is capable of achieving such data writing speed. The speed parameters promised by the manufacturer may not be reached if the "fast" disk is not provided with an appropriate cooling system.
The format of this SSD drive (physical size of the drive) is M.2 42mm (2242).
This SSD drive interface is SATA III (6Gb/s). If you insert this drive into an older interface slot, the speed of the drive will decrease, as the drive will not have sufficient data transfer speed (Bandwidth).
Basic information
Capacity
128 GB
The HDD capacity in Gigabytes indicates how much information can be stored by the HDD. The capacity of the HDD is fixed and cannot be increased after buying the HDD. Therefore, upon buying the HDD you should verify its compliance with your current volume requirements and provides a reserve for future needs.
Type
: SATA
Read speed (sequential)
560 MB/s
Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.
If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.
Write speed (sequential)
500 MB/s
The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.
Functionality
Radiators
: Nav
Lighting
: Nav
Ports and equipment
Form factor
M.2 42mm (2242)
Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at TopPC.ee section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.
1.8" discs are intended for the ultra-compact class portable computers.
PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.
Interface
: SATA III (6Gb/s)
Interface
M.2
SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.
The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.
Specifikācija
Memory type
: TLC (Triple-Level Cell)
Random Read IOPS
: 80K
Random Write IOPS
: 85K
Endurance (TBW)
: Not specified
More detailed specification
Active garbage collection Features - Yes
ARTIKEL1 - 128GB M.2 2242 SSD
ARTIKEL2 - SATA3 B+M KEY TLC
Breite - 0.1
Category Code - SSU
Category_1 - Hard Drives and Pendrives
Category_2 - Internal SSD - M.2
Certification Features - CE/FCC/BSMI/KC/RCM
Component for Features - PC
Data transfer rate Features - 6 Gbit/s
Depth Weight & dimensions - 3.58 mm
Description - Transcend's ultra-compact SATA III 6Gb/s M.2 SSD 430S addresses the high-performance needs and strict size limitations of small form factor devices, best suited for Ultrabooks and thin, light notebooks. Boasting high-quality flash chips, DDR3 DRAM cache, and enhanced firmware algorithms, Transcend's M.2 SSD 430S delivers optimal reliability. 3D expansion to break through limits
Unlike the existing planar NAND chips, 3D NAND flash is a type of flash memory in which the memory cells are stacked vertically in multiple layers. 3D NAND is developed to break through density limitations of the 2D planar NAND, and thus can deliver a greater level of performance and endurance. Perfect for your Ultrabook
Compliant with M.2 form factors Type 2242 and 2280, Transcend's 3D NAND M.2 SSDs are perfect for use in Ultrabooks and lightweight notebooks. Measured at just 42mm in length, the M.2 SSD 430S makes for an easy upgrade to your computer, taking up little space while giving it a much needed energy boost. Superior transfer speeds
Featuring the M.2 standard (42mm), the next generation SATA III 6Gb/s interface and a powerful controller, Transcend's M.2 SSD 430S reaches incredible read and write speeds of up to 560MB/s and 500MB/s. When used as a cache, the M.2 SSD 430S provides 1.5 times faster boot time than conventional hard drives. High IOPS to speed up loading times
Dedicated to maximizing high-performance computing, the M.2 SSD 430S features 4k random file read and write speeds up to 85,000 IOPS that deliver incredibly short loading times and almost instant response for heavy graphics and multimedia applications. Store more in less space
The M.2 form factor enables expansion and integration of functions onto a single form factor module solution. M.2 SSDs include a smaller form factor but with larger capacities than that of mSATA and half-slim SSDs. Potent and feature-laden
Despite its extra-small dimensions, the M.2 SSD 430S boasts a DDR3 DRAM cache and contains advanced features to enhance the performance of the SSD. Error Correcting Code (ECC)
Detects and corrects transfer errors to prevent data corruption Garbage Collection
Relocates existing data to release memory blocks Wear-leveling
Distributes data evenly across memory cells to prolong SSD's lifespan DDR3 DRAM cache
Stores a temporary copy of the most active data to shorten access times SSD Scope software
Transcend SSD Scope is advanced, user-friendly software that makes it easy to ensure your Transcend SSD remains healthy, and continues to run fast and error-free by determining the condition and optimizing the performance of your drive. Guaranteed quality
Transcend’s solid state drives are built to the highest standards and rigorously tested, and offer outstanding quality, performance, and reliability.Space-saving M.2 Type 2242 form factorUp to 560 MB/s read; 500 MB/s write3D NAND flash memoryRAID engine and LDPC coding for data integrity; DDR3 DRAM cache for short access timesSupports S.M.A.R.T., TRIM, and NCQ commands
EANCode - 0760557842910
EAN_code - 0760557842910
Gewicht - 0.02
GRUPPE1 - Hard Drive/Optical
GRUPPE2 - Solid State Drive
Harmonized System (HS) code Logistics data - 84717070
Height Weight & dimensions - 22 mm
HERSTELLER - TRANSCEND
Hoehe - 0.01
HSTNUMMER - TS128GMTS430S
Interface Features - Serial ATA III
Laenge - 0.14
Linux operating systems supported Features - Kernel 2.6.31
Low-density parity-check (LDPC) Features - Yes
Mac operating systems supported Features - No
Manufacturer - Transcend
Manufacturer_code - TS128GMTS430S
Mean time between failures (MTBF) Features - 2000000 h
Memory type Features - 3D NAND
Name - Transcend 430S 128 GB Solid State Drive (SATA 6 GB / s, M.2 2242)
Native Command Queuing (NCQ) Features - Yes
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Operating voltage Power - 3.3 V
Product colour Other features - Black, Green
RAID support Features - Yes
Random read (4KB) Features - 35000 IOPS
Random write (4KB) Features - 80000 IOPS
Read speed Features - 560 MB/s
S.M.A.R.T. support Features - Yes
SSD capacity Features - 128 GB
SSD form factor Features - M.2
SSD series - 430S
Stck_Kart - 9998
Stck_Pal - 0
Storage temperature (T-T) Operational conditions - -40 - 85 °C
Storno - N
Summary - Transcend M.2 SSD 430S 128GB. SSD capacity: 128 GB, SSD form factor: M.2, Read speed: 560 MB/s, Write speed: 380 MB/s, Data transfer rate: 6 Gbit/s, Component for: PC
TBW rating Features - 70
TRIM support Features - Yes
Unit Box Height - 0.01
Unit Box Length - 0.13
Unit Box Width - 0.1
Unit Calculated Volume - 0.00013 cubm
Unit Calculated Weight - 0.02 kg
Units per Shipping Box - 1
Vendor Homepage - https://uk.transcend-info.com/Products/No-981
Warranty - 36L months
Weight - 0,02
Weight Weight & dimensions - 5 g
Width Weight & dimensions - 42 mm
Windows operating systems supported Features - Windows 10, Windows 7, Windows 8
Write speed Features - 380 MB/s
ARTIKEL1 - 128GB M.2 2242 SSD
ARTIKEL2 - SATA3 B+M KEY TLC
Breite - 0.1
Category Code - SSU
Category_1 - Hard Drives and Pendrives
Category_2 - Internal SSD - M.2
Certification Features - CE/FCC/BSMI/KC/RCM
Component for Features - PC
Data transfer rate Features - 6 Gbit/s
Depth Weight & dimensions - 3.58 mm
Description - Transcend's ultra-compact SATA III 6Gb/s M.2 SSD 430S addresses the high-performance needs and strict size limitations of small form factor devices, best suited for Ultrabooks and thin, light notebooks. Boasting high-quality flash chips, DDR3 DRAM cache, and enhanced firmware algorithms, Transcend's M.2 SSD 430S delivers optimal reliability. 3D expansion to break through limits
Unlike the existing planar NAND chips, 3D NAND flash is a type of flash memory in which the memory cells are stacked vertically in multiple layers. 3D NAND is developed to break through density limitations of the 2D planar NAND, and thus can deliver a greater level of performance and endurance. Perfect for your Ultrabook
Compliant with M.2 form factors Type 2242 and 2280, Transcend's 3D NAND M.2 SSDs are perfect for use in Ultrabooks and lightweight notebooks. Measured at just 42mm in length, the M.2 SSD 430S makes for an easy upgrade to your computer, taking up little space while giving it a much needed energy boost. Superior transfer speeds
Featuring the M.2 standard (42mm), the next generation SATA III 6Gb/s interface and a powerful controller, Transcend's M.2 SSD 430S reaches incredible read and write speeds of up to 560MB/s and 500MB/s. When used as a cache, the M.2 SSD 430S provides 1.5 times faster boot time than conventional hard drives. High IOPS to speed up loading times
Dedicated to maximizing high-performance computing, the M.2 SSD 430S features 4k random file read and write speeds up to 85,000 IOPS that deliver incredibly short loading times and almost instant response for heavy graphics and multimedia applications. Store more in less space
The M.2 form factor enables expansion and integration of functions onto a single form factor module solution. M.2 SSDs include a smaller form factor but with larger capacities than that of mSATA and half-slim SSDs. Potent and feature-laden
Despite its extra-small dimensions, the M.2 SSD 430S boasts a DDR3 DRAM cache and contains advanced features to enhance the performance of the SSD. Error Correcting Code (ECC)
Detects and corrects transfer errors to prevent data corruption Garbage Collection
Relocates existing data to release memory blocks Wear-leveling
Distributes data evenly across memory cells to prolong SSD's lifespan DDR3 DRAM cache
Stores a temporary copy of the most active data to shorten access times SSD Scope software
Transcend SSD Scope is advanced, user-friendly software that makes it easy to ensure your Transcend SSD remains healthy, and continues to run fast and error-free by determining the condition and optimizing the performance of your drive. Guaranteed quality
Transcend’s solid state drives are built to the highest standards and rigorously tested, and offer outstanding quality, performance, and reliability.Space-saving M.2 Type 2242 form factorUp to 560 MB/s read; 500 MB/s write3D NAND flash memoryRAID engine and LDPC coding for data integrity; DDR3 DRAM cache for short access timesSupports S.M.A.R.T., TRIM, and NCQ commands
EANCode - 0760557842910
EAN_code - 0760557842910
Gewicht - 0.02
GRUPPE1 - Hard Drive/Optical
GRUPPE2 - Solid State Drive
Harmonized System (HS) code Logistics data - 84717070
Height Weight & dimensions - 22 mm
HERSTELLER - TRANSCEND
Hoehe - 0.01
HSTNUMMER - TS128GMTS430S
Interface Features - Serial ATA III
Laenge - 0.14
Linux operating systems supported Features - Kernel 2.6.31
Low-density parity-check (LDPC) Features - Yes
Mac operating systems supported Features - No
Manufacturer - Transcend
Manufacturer_code - TS128GMTS430S
Mean time between failures (MTBF) Features - 2000000 h
Memory type Features - 3D NAND
Name - Transcend 430S 128 GB Solid State Drive (SATA 6 GB / s, M.2 2242)
Native Command Queuing (NCQ) Features - Yes
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Operating voltage Power - 3.3 V
Product colour Other features - Black, Green
RAID support Features - Yes
Random read (4KB) Features - 35000 IOPS
Random write (4KB) Features - 80000 IOPS
Read speed Features - 560 MB/s
S.M.A.R.T. support Features - Yes
SSD capacity Features - 128 GB
SSD form factor Features - M.2
SSD series - 430S
Stck_Kart - 9998
Stck_Pal - 0
Storage temperature (T-T) Operational conditions - -40 - 85 °C
Storno - N
Summary - Transcend M.2 SSD 430S 128GB. SSD capacity: 128 GB, SSD form factor: M.2, Read speed: 560 MB/s, Write speed: 380 MB/s, Data transfer rate: 6 Gbit/s, Component for: PC
TBW rating Features - 70
TRIM support Features - Yes
Unit Box Height - 0.01
Unit Box Length - 0.13
Unit Box Width - 0.1
Unit Calculated Volume - 0.00013 cubm
Unit Calculated Weight - 0.02 kg
Units per Shipping Box - 1
Vendor Homepage - https://uk.transcend-info.com/Products/No-981
Warranty - 36L months
Weight - 0,02
Weight Weight & dimensions - 5 g
Width Weight & dimensions - 42 mm
Windows operating systems supported Features - Windows 10, Windows 7, Windows 8
Write speed Features - 380 MB/s
