ID: 1310925
Product code: SEDC600M/1920G
In stock 24 units
Warranty: 3 years
Kingston DC600M, 1.92TB, SATA III
Picture may differ from actual product, there can be accessories and parts not supplied with the actual product.
-
Omniva parcel machineWithin 1-2 working days1.99 € -
SmartPosti parcel terminalWithin 1-2 working days1.99 € -
Unisend parcel terminalWithin 1-2 working days1.99 € -
Delivery by courier to the addressWithin 1-2 working days5.99 €
Main product parameters All parameters
- Capacity: 1.92TB
- Type: SATA
- Read speed (sequential): 560 MB/s
- Write speed (sequential): 530 MB/s
- Form factor: 2.5"
- Interface: SATA III (6Gb/s)
Description
Available for purchase, the Kingston 2.5" format SSD disk with a large volume of 1.92TB.
The disk is equipped with the traditional SATA port. It uses SATA data and power cables.
This disc uses SATA III technology - although it is an older protocol, the SATA type SSD disc is still very useful for everyday needs and in cases where you have to fit a certain budget.
The read speed for this SSD drive reaches 560 MB/s. However, it's crucial to note - if the "fast" drives are not provided with adequate cooling, they may not be able to operate at the speed indicated by the manufacturer.
The write speed (Sequential write speed) of this SSD is 530 MB/s. However, if adequate cooling is not provided, "fast" drives may not achieve the speeds guaranteed by the manufacturer.
This is an SSD disk in the 2.5" format.
This SSD disk has a SATA III (6Gb/s) interface. Keep in mind that if you insert a disk with a newer interface (for example, with PCIe 4.0 or 5.0) into an older interface slot (for example, PCIe 3.0), the disk speed will decrease because the disk will not have sufficient data transfer speed (Bandwidth).
Basic information
Capacity
1.92TB
The HDD capacity in Gigabytes indicates how much information can be stored by the HDD. The capacity of the HDD is fixed and cannot be increased after buying the HDD. Therefore, upon buying the HDD you should verify its compliance with your current volume requirements and provides a reserve for future needs.
Type
: SATA
Read speed (sequential)
560 MB/s
Sequential read speed or the mean data reading speed is the most important criterion of the high-speed operation of the SSD. The data from the SSD will be read much more often than written to it because the operating system stores the processed data in the RAM in most cases.
If you want the reading speed of the purchased SSD to exceed the speed of the classic HDD considerably you should choose the SSD with the reading speed of 200 MB/s or above. The additional increase in the performance will be achieved on the account of the data search (SeekTime) which is of much higher level with SSDs than any HDD.
Write speed (sequential)
530 MB/s
The writing speed is almost as important as the reading speed. Also this parameter determines the performance of the SSD, however, as the writing to the disc happens not as often as the data reading and average user will find it subjectively difficult to distinguish between any speed above 100 MB/s and higher indices, except the cases when the SSD is used in a server, for audio/video recording, etc.
Functionality
Radiators
: Nav
Lighting
: Nav
Ports and equipment
Form factor
2.5"
Thanks to the small size provided by the SSD technology the standard size of the discs is 2.5", and it is suitable for an average portable computer. It is possible to install the 2.5" disc in the desktop computer if the transition 2.5" -> 3.5" is used, and this transition can be bought at a low cost at TopPC.ee section"Adapteri". The discs with the format 2.5" + 3.5" have this transition included.
1.8" discs are intended for the ultra-compact class portable computers.
PCI-Express SSDs are intended for desktop computers with a free PCI-Express plug available. This technology in most cases is used for ensuring the performance that exceeds the possibilities of other types of connections.
Interface
: SATA III (6Gb/s)
Interface
SATA
SSDs with SATAII and SATAIII connection are compatible with the connections of both types in the motherboard. Still, it has to be taken into account that the motherboard SATAII connection can provide maximum about 300 MB/s transmission capacity which can reduce the actual transmission capacity of the SSDs whose reading and/or writing speed exceeds this level to the capacity limits of the SATAII.
The situation is similar with the PCI-Express and SATAIII connection slots. Although the SATAIII standard can provide up to 600 MB/s data transmission capacity there are SSDs with the speed exceeding this limit, in this case the manufacturer chooses the PCI-Express connection slot with a higher transmission capacity. The PCI-Express discs cannot be connected to the portable computer.
Specifikācija
Memory type
: TLC (Triple-Level Cell)
Random Read IOPS
: 94K
Random Write IOPS
: 78K
Endurance (TBW)
: 3504 TB
More detailed specification
Brand - Kingston Technology
BrandPartCode - SEDC600M/1920G
Category - Internal Solid State Drives
Category Code - SFM
Component for Features - Server/workstation
Country of origin Logistics data - China, Taiwan
Data transfer rate Features - 6 Gbit/s
Depth Weight & dimensions - 100.1 mm
Description - Kingston’s DC600M and DC600ME SSDs are fourth-generation data center SATA 3.0, 6Gbps SSDs utilising 3D TLC NAND intended for “mixed use” server workloads. Both are well suited for a wide variety of server applications and include on-board power loss protection via hold-up capacitors. DC600M and DC600ME are designed to protect data against unexpected power failure and to ensure the drive will successfully reinitialise on the next power-up of the system. Designed to deliver low latency and IO consistency for system integrators, hyperscale data centers and cloud service providers. DC600ME features AES 256-bit encryption and supports TCG OPAL 2.0 security standards. Capacities available from 480GB–7.68TB* to meet your data storage requirements. Designed for data center environments Optimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria. Hardware-based PLP
Power loss capacitors to protect user data against unexpected power loss and enhance performance. Delivers excellent quality of service (QoS)*
Optimised performance predictability to meet
service-level agreements (SLAs). AES 256-bit Encryption with DC600ME Protect sensitive data with support for AES 256-bit hardware-based encryption and TCG Opal 2.0 security standards with DC600ME. Capacities up to 7.68TB Upgrade and manage storage with capacities up to 7.68TB.*Designed for data center environmentsHardware-based power loss protectionLatency and IOPS consistencyAES 256-bit encryption with DC600MECapacities of up to 7.68TB**Some of the listed capacity on a flash storage device is used for formatting and other functions and is thus not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For more information, go to Kingston’s Flash Guide at kingston.com/flashguide.
** Quality of service (QoS) of an SSD refers to the consistency and predictability of latency (response time) and IOPS (IOs per second) performance while servicing a read/write workload. QoS metrics demonstrate that, given a worst-case workload tested over a period of time, an SSD’s latency and IOPS profiles stay within a specified range without having unexpected outliers causing a sudden drop in application performance.
*** Measurement taken once the workload has reached a steady state but including all background activities required for normal operation and data reliability.
**** Based on 1.92TB capacity.
*****Workload based on FIO, random aligned 4KB QD=1 workload. Quality of service is measured as the time taken for 99.999 percentile of commands to finish the round trip from host to drive and to host. Typical latency is measured as the time taken for 99.9 percentile of commands to finish the round trip from host to drive and to host.
****** Total bytes written (TBW) is derived from the JEDEC Enterprise Workload (JESD219A).
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - H/W PLP function - Yes
Features - Hardware encryption - No
Features - Hot-Plug support - Yes
Features - Interface - Serial ATA III
Features - Mean time between failures (MTBF) - 2000000 h
Features - Memory type - 3D TLC NAND
Features - Random read (4KB) - 94000 IOPS
Features - Random write (4KB) - 78000 IOPS
Features - Read latency - 200 µs
Features - Read speed - 560 MB/s
Features - SSD capacity - 1.92 TB
Features - SSD form factor - 2.5"
Features - Target workload - Mixed Use (MU)
Features - TBW rating - 3504
Features - Use conditions - Server/Enterprise
Features - Write latency - 30 µs
Features - Write speed - 530 MB/s
GTIN - 0740617334890
GTIN - 740617334890
GTIN - 8592978563820
H/W PLP function Features - Yes
Hardware encryption Features - No
Height Weight & dimensions - 7 mm
Hot-Plug support Features - Yes
Interface Features - Serial ATA III
Logistics data - Country of origin - China, Taiwan
Logistics data - Master (outer) case gross weight - 989.98 g
Logistics data - Master (outer) case height - 69.8 mm
Logistics data - Master (outer) case length - 203.2 mm
Logistics data - Master (outer) case width - 135.9 mm
Logistics data - Products per master (outer) case - 10 pc(s)
LongDesc - Kingston’s DC600M and DC600ME SSDs are fourth-generation data center SATA 3.0, 6Gbps SSDs utilising 3D TLC NAND intended for “mixed use” server workloads. Both are well suited for a wide variety of server applications and include on-board power loss protection via hold-up capacitors. DC600M and DC600ME are designed to protect data against unexpected power failure and to ensure the drive will successfully reinitialise on the next power-up of the system. Designed to deliver low latency and IO consistency for system integrators, hyperscale data centers and cloud service providers. DC600ME features AES 256-bit encryption and supports TCG OPAL 2.0 security standards. Capacities available from 480GB–7.68TB* to meet your data storage requirements.Designed for data center environments Optimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria.Hardware-based PLPPower loss capacitors to protect user data against unexpected power loss and enhance performance.Delivers excellent quality of service (QoS)*Optimised performance predictability to meetservice-level agreements (SLAs).AES 256-bit Encryption with DC600ME Protect sensitive data with support for AES 256-bit hardware-based encryption and TCG Opal 2.0 security standards with DC600ME. Capacities up to 7.68TB Upgrade and manage storage with capacities up to 7.68TB.*
LongProductName - 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
LongSummaryDescription - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 1.92 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Master (outer) case gross weight Logistics data - 989.98 g
Master (outer) case height Logistics data - 69.8 mm
Master (outer) case length Logistics data - 203.2 mm
Master (outer) case width Logistics data - 135.9 mm
Mean time between failures (MTBF) Features - 2000000 h
Memory type Features - 3D TLC NAND
Model - SEDC600M/1920G
Non-operating vibration Operational conditions - 20 G
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Operating vibration Operational conditions - 2.17 G
Operational conditions - Non-operating vibration - 20 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Operating vibration - 2.17 G
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Package depth Packaging data - 9.14 mm
Package height Packaging data - 184.2 mm
Package weight Packaging data - 91.2 g
Package width Packaging data - 129.5 mm
Packaging data - Package depth - 9.14 mm
Packaging data - Package height - 184.2 mm
Packaging data - Package weight - 91.2 g
Packaging data - Package width - 129.5 mm
Power - Power consumption (average) - 1.45 W
Power - Power consumption (idle) - 1.3 W
Power - Power consumption (read) - 1.6 W
Power - Power consumption (write) - 3.6 W
Power consumption (average) Power - 1.45 W
Power consumption (idle) Power - 1.3 W
Power consumption (read) Power - 1.6 W
Power consumption (write) Power - 3.6 W
ProductName - 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
Products per master (outer) case Logistics data - 10 pc(s)
Random read (4KB) Features - 94000 IOPS
Random write (4KB) Features - 78000 IOPS
Read latency Features - 200 µs
Read speed Features - 560 MB/s
ShortSummaryDescription - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD, 1.92 TB, 2.5", 560 MB/s, 6 Gbit/s
SSD capacity Features - 1.92 TB
SSD form factor Features - 2.5"
SSD series - DC600M
Storage temperature (T-T) Operational conditions - -40 - 85 °C
Summary - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 1.92 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Target workload Features - Mixed Use (MU)
TBW rating Features - 3504
Title - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
Unit Box Height - 0.2
Unit Box Length - 0.07
Unit Box Width - 0.014
Unit Calculated Volume - 0.000196 cubm
Unit Calculated Weight - 0.095 kg
Units per Shipping Box - 10
URL - https://www.kingston.com/
Use conditions Features - Server/Enterprise
Vendor Homepage - https://www.kingston.com/
Warranty - 60L months
WarrantyInfo - Limited 5-year warranty with free technical support
Weight & dimensions - Depth - 100.1 mm
Weight & dimensions - Height - 7 mm
Weight & dimensions - Weight - 69 g
Weight & dimensions - Width - 69.8 mm
Weight Weight & dimensions - 69 g
Width Weight & dimensions - 69.8 mm
Write latency Features - 30 µs
Write speed Features - 530 MB/s
BrandPartCode - SEDC600M/1920G
Category - Internal Solid State Drives
Category Code - SFM
Component for Features - Server/workstation
Country of origin Logistics data - China, Taiwan
Data transfer rate Features - 6 Gbit/s
Depth Weight & dimensions - 100.1 mm
Description - Kingston’s DC600M and DC600ME SSDs are fourth-generation data center SATA 3.0, 6Gbps SSDs utilising 3D TLC NAND intended for “mixed use” server workloads. Both are well suited for a wide variety of server applications and include on-board power loss protection via hold-up capacitors. DC600M and DC600ME are designed to protect data against unexpected power failure and to ensure the drive will successfully reinitialise on the next power-up of the system. Designed to deliver low latency and IO consistency for system integrators, hyperscale data centers and cloud service providers. DC600ME features AES 256-bit encryption and supports TCG OPAL 2.0 security standards. Capacities available from 480GB–7.68TB* to meet your data storage requirements. Designed for data center environments Optimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria. Hardware-based PLP
Power loss capacitors to protect user data against unexpected power loss and enhance performance. Delivers excellent quality of service (QoS)*
Optimised performance predictability to meet
service-level agreements (SLAs). AES 256-bit Encryption with DC600ME Protect sensitive data with support for AES 256-bit hardware-based encryption and TCG Opal 2.0 security standards with DC600ME. Capacities up to 7.68TB Upgrade and manage storage with capacities up to 7.68TB.*Designed for data center environmentsHardware-based power loss protectionLatency and IOPS consistencyAES 256-bit encryption with DC600MECapacities of up to 7.68TB**Some of the listed capacity on a flash storage device is used for formatting and other functions and is thus not available for data storage. As such, the actual available capacity for data storage is less than what is listed on the products. For more information, go to Kingston’s Flash Guide at kingston.com/flashguide.
** Quality of service (QoS) of an SSD refers to the consistency and predictability of latency (response time) and IOPS (IOs per second) performance while servicing a read/write workload. QoS metrics demonstrate that, given a worst-case workload tested over a period of time, an SSD’s latency and IOPS profiles stay within a specified range without having unexpected outliers causing a sudden drop in application performance.
*** Measurement taken once the workload has reached a steady state but including all background activities required for normal operation and data reliability.
**** Based on 1.92TB capacity.
*****Workload based on FIO, random aligned 4KB QD=1 workload. Quality of service is measured as the time taken for 99.999 percentile of commands to finish the round trip from host to drive and to host. Typical latency is measured as the time taken for 99.9 percentile of commands to finish the round trip from host to drive and to host.
****** Total bytes written (TBW) is derived from the JEDEC Enterprise Workload (JESD219A).
Features - Component for - Server/workstation
Features - Data transfer rate - 6 Gbit/s
Features - H/W PLP function - Yes
Features - Hardware encryption - No
Features - Hot-Plug support - Yes
Features - Interface - Serial ATA III
Features - Mean time between failures (MTBF) - 2000000 h
Features - Memory type - 3D TLC NAND
Features - Random read (4KB) - 94000 IOPS
Features - Random write (4KB) - 78000 IOPS
Features - Read latency - 200 µs
Features - Read speed - 560 MB/s
Features - SSD capacity - 1.92 TB
Features - SSD form factor - 2.5"
Features - Target workload - Mixed Use (MU)
Features - TBW rating - 3504
Features - Use conditions - Server/Enterprise
Features - Write latency - 30 µs
Features - Write speed - 530 MB/s
GTIN - 0740617334890
GTIN - 740617334890
GTIN - 8592978563820
H/W PLP function Features - Yes
Hardware encryption Features - No
Height Weight & dimensions - 7 mm
Hot-Plug support Features - Yes
Interface Features - Serial ATA III
Logistics data - Country of origin - China, Taiwan
Logistics data - Master (outer) case gross weight - 989.98 g
Logistics data - Master (outer) case height - 69.8 mm
Logistics data - Master (outer) case length - 203.2 mm
Logistics data - Master (outer) case width - 135.9 mm
Logistics data - Products per master (outer) case - 10 pc(s)
LongDesc - Kingston’s DC600M and DC600ME SSDs are fourth-generation data center SATA 3.0, 6Gbps SSDs utilising 3D TLC NAND intended for “mixed use” server workloads. Both are well suited for a wide variety of server applications and include on-board power loss protection via hold-up capacitors. DC600M and DC600ME are designed to protect data against unexpected power failure and to ensure the drive will successfully reinitialise on the next power-up of the system. Designed to deliver low latency and IO consistency for system integrators, hyperscale data centers and cloud service providers. DC600ME features AES 256-bit encryption and supports TCG OPAL 2.0 security standards. Capacities available from 480GB–7.68TB* to meet your data storage requirements.Designed for data center environments Optimised to meet the high demands of server RAID applications with low latency and IO consistency as the key design criteria.Hardware-based PLPPower loss capacitors to protect user data against unexpected power loss and enhance performance.Delivers excellent quality of service (QoS)*Optimised performance predictability to meetservice-level agreements (SLAs).AES 256-bit Encryption with DC600ME Protect sensitive data with support for AES 256-bit hardware-based encryption and TCG Opal 2.0 security standards with DC600ME. Capacities up to 7.68TB Upgrade and manage storage with capacities up to 7.68TB.*
LongProductName - 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
LongSummaryDescription - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 1.92 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Master (outer) case gross weight Logistics data - 989.98 g
Master (outer) case height Logistics data - 69.8 mm
Master (outer) case length Logistics data - 203.2 mm
Master (outer) case width Logistics data - 135.9 mm
Mean time between failures (MTBF) Features - 2000000 h
Memory type Features - 3D TLC NAND
Model - SEDC600M/1920G
Non-operating vibration Operational conditions - 20 G
Operating temperature (T-T) Operational conditions - 0 - 70 °C
Operating vibration Operational conditions - 2.17 G
Operational conditions - Non-operating vibration - 20 G
Operational conditions - Operating temperature (T-T) - 0 - 70 °C
Operational conditions - Operating vibration - 2.17 G
Operational conditions - Storage temperature (T-T) - -40 - 85 °C
Package depth Packaging data - 9.14 mm
Package height Packaging data - 184.2 mm
Package weight Packaging data - 91.2 g
Package width Packaging data - 129.5 mm
Packaging data - Package depth - 9.14 mm
Packaging data - Package height - 184.2 mm
Packaging data - Package weight - 91.2 g
Packaging data - Package width - 129.5 mm
Power - Power consumption (average) - 1.45 W
Power - Power consumption (idle) - 1.3 W
Power - Power consumption (read) - 1.6 W
Power - Power consumption (write) - 3.6 W
Power consumption (average) Power - 1.45 W
Power consumption (idle) Power - 1.3 W
Power consumption (read) Power - 1.6 W
Power consumption (write) Power - 3.6 W
ProductName - 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
Products per master (outer) case Logistics data - 10 pc(s)
Random read (4KB) Features - 94000 IOPS
Random write (4KB) Features - 78000 IOPS
Read latency Features - 200 µs
Read speed Features - 560 MB/s
ShortSummaryDescription - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD, 1.92 TB, 2.5", 560 MB/s, 6 Gbit/s
SSD capacity Features - 1.92 TB
SSD form factor Features - 2.5"
SSD series - DC600M
Storage temperature (T-T) Operational conditions - -40 - 85 °C
Summary - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD. SSD capacity: 1.92 TB, SSD form factor: 2.5", Read speed: 560 MB/s, Write speed: 530 MB/s, Data transfer rate: 6 Gbit/s, Component for: Server/workstation
Target workload Features - Mixed Use (MU)
TBW rating Features - 3504
Title - Kingston Technology 1920G DC600M (Mixed-Use) 2.5” Enterprise SATA SSD
Unit Box Height - 0.2
Unit Box Length - 0.07
Unit Box Width - 0.014
Unit Calculated Volume - 0.000196 cubm
Unit Calculated Weight - 0.095 kg
Units per Shipping Box - 10
URL - https://www.kingston.com/
Use conditions Features - Server/Enterprise
Vendor Homepage - https://www.kingston.com/
Warranty - 60L months
WarrantyInfo - Limited 5-year warranty with free technical support
Weight & dimensions - Depth - 100.1 mm
Weight & dimensions - Height - 7 mm
Weight & dimensions - Weight - 69 g
Weight & dimensions - Width - 69.8 mm
Weight Weight & dimensions - 69 g
Width Weight & dimensions - 69.8 mm
Write latency Features - 30 µs
Write speed Features - 530 MB/s
